Kayayyaki
SFG Atomatik Solder Manna Printe A9
Amfani
● Nau'in gada mai ratayewa mai haɗa kai tsaye.
● Buga kai tare da na'urar da za a iya tsarawa da kuma dakatar da motar motsa jiki mai daidaita kai.
● Nau'in nunin faifan ƙafafu huɗu tare da faifai biyu na gefe biyu yana tabbatar da daidaiton motsi da kwanciyar hankali lokacin da scraper ke gudu da baya da baya.
● Tsarin watsa bel na musamman yana guje wa makale ko fadowa daga PCB.
● Motar da za a iya tsarawa tana sarrafa saurin sufuri kuma yana sanya PCB a daidai matsayi.
● An raba naúrar don tsaftacewa daga kyamarar CCD, wanda zai iya rage nauyin motar da motsa jiki, inganta daidaitattun matsayi da sauri da kuma tsawaita rayuwar sabis.
● Tare da servo motor da gubar dunƙule, haɗin kai tsaye UVW dandamali yana nuna tare da madaidaicin madaidaici, tsayin daka da ƙananan tsari.
Ƙayyadaddun bayanai
| Firam ɗin allo | Min Girman | 470×370mm |
| Girman Girma | 737×737mm | |
| Kauri | 25-40 mm | |
| PCB Min Girman | 50×50mm | |
| PCB Max Girman | 510×340mm | |
| PCB Kauri | 0.4 ~ 6 mm | |
| PCB Warpage | <1% | |
| Tsawon Sufuri | 900± 40mm | |
| Hanyar sufuri | Hagu-Dama; Dama-Hagu; Hagu-Hagu; Dama-Dama | |
| Gudun sufuri | Matsakaicin 1500mm/s (Mai Shirye-shirye) | |
| Wurin allo PCB | Tsarin Tallafawa | Magnetic Fin/Sake tebur daidaitacce / toshe tallafi |
| Tsarin Matsala | Side clamping, Vacuum bututun ƙarfe, Matsin lamba Z mai ja da kai ta atomatik | |
| Shugaban Printer | Na'urar bugawa mai zaman kanta guda biyu | |
| Saurin Squeegee | 6 ~ 200mm/sec | |
| Matsin lamba | 0 ~ 15 kg | |
| Squeegee Angel | 60°/55°/45° | |
| Nau'in Squeegee | Bakin karfe (misali), filastik | |
| Gudun Rabuwar Stencil | 0.1 ~ 20mm / sec (Mai iya aiki) | |
| Tsarin Tsaftacewa | Dry, Wet, Vacuum (Programmable) | |
| Matsakaicin Daidaita Tebur | X:±10mm;Y:±10mm;θ:±2° | |
| Binciken Manna Solder | 2D Dubawa (daidaitacce) | |
| Maimaita Daidaitaccen Matsayi | ± 0.008mm | |
| Daidaiton Bugawa | ± 0.02mm | |
| Lokacin Zagayowar | <11s (Bare Bugawa & Tsaftacewa) | |
| Canjin Samfurin | <5min | |
| Ana Bukatar Iska | 4.5-6 kg / cm2 | |
| Shigar da Wuta | AC: 220± 10%, 50/60HZ, 3KW | |
| Hanyar sarrafawa | PC Control | |
| Girman Injin | 1220 (L) × 1530 (W) × 1500 (H) mm | |
| Nauyin Inji | Kimanin: 1200kg | |
Gabatarwa
● Tsarin Scraper
Arch gada nau'in dakatar da kai tsaye-da alaka scraper Print shugaban tare da shirye-shirye da kuma dakatar da kai daidaita stepper motor drive.Four dabaran sakawa slide nau'in tare da bilateral biyu sliders tabbatar da motsi daidaito da kwanciyar hankali a lokacin da scraper ne a guje baya da kuma forth. Biyu sets na raba scraper. shugabannin suna kore bi da bi biyu high daidaici stepper Motors, tabbatar da daidaito da kwanciyar hankali na pressure.The rufaffiyar madauki matsa lamba kula tsarin iya daidai gane da kuma sarrafa squeegee matsa lamba a lokacin real-lokaci samar.
● Hoto da Tsarin gani
Hasken zobe na Uniform, babban haske coaxial haske da ingantaccen tsarin hangen nesa na sama/ƙananan Cikakken kewayon ramuwa, atomatik kuma ingantaccen gane kowane nau'in maki MARK.Aiwatar da tin plating, jan plating, zinariya plating, tin spraying, FPC da sauran iri PCB tare da daban-daban launuka, iya tabbatar da high daidaito.
● Tsarin Tsaftacewa
Tsarin tsaftacewa na Stencil yana atomatik kuma yana da tasiri.Zaɓuɓɓuka uku na bushewa mai bushewa, tsaftacewar rigar da Vacuum deaning za'a iya zaɓar don amfani, duka daban-daban da ninka.Hakanan zaka iya zaɓar Dean da hannu. Naúrar zuwa Dean an rabu da kyamarar CCD, wanda zai iya rage nauyin motar da sha'awar, inganta daidaiton matsayi da sauri da tsawaita rayuwar sabis na sprinkler. Ayyukan software na iya sarrafa adadin barasa da takarda tsaftacewa na stencil, Ingantacciyar adana ƙarin abubuwan amfani. Ana goyan bayan tsabtace tsabta tare da fan mai kwazo, mai ƙarfi da inganci.
● Tsarin Daidaitawa na Musamman na Dandalin Dama
An ƙera haɗin haɗin gatura guda uku tare da halaye masu ƙarfin gaske.lt na iya daidaita tsayin jack PIN na PCB da sauri daban-daban.
● Interface na Aiki
Amfani da Windows XP interface interface, kuma mai sauƙin koyo don mai amfani, tare da kyakkyawan ra'ayi mai mu'amala da injin-inji.An ƙera Programi ng tare da aikin koyarwa da kewayawa, ana samun jagora akan kowane mataki. Sinanci/Turanci zaɓen Aikin Jarida/Rakodin Rubucewa/Ganewar Bincike
● 2D Manna Buga ingancin Gwajin Da Bincike
Tabbatar da ingancin bugu na samfur, Wannan fasalin zai iya gano saurin bugun bugu, ƙarancin manna, ɓacewa da gada da lahani.
